When you remove/install or replace the camera, you should check the camera image on the multi-around monitor "Bird-eye view." If necessary, calibrate the monitor (Refer to Calibrating Camera Image [Multi-Around Monitor] Work Procedure). <Vehicles with multi-around monitor>
To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
))
)