[Previous][Next]
Diagnosis Procedure
1.VISUAL INSPECTION
Check side radar and side radar bracket for damage or looseness.
Does damage or looseness exist?
  1. Repair or replace affected components. Refer to Removal and Installation.
  2. Perform side radar alignment. Refer to Work Procedure.
.
 
2.CHECK SIDE RADAR DIAGNOSTIC TROUBLE CODE RESULTS
Check if the “C1E10-54” is detected in "Diagnostic Trouble Code" of “Side radar (Rear left)”.
Is “C1E10-54” detected?
Replace the side radar LH. Refer to Removal and Installation.
INSPECTION END