[Previous][Next]
Diagnosis Procedure
1.VISUAL INSPECTION
Check distance sensor and distance sensor sensor bracket for damage or looseness.
Does damage or looseness exist?
  1. Repair or replace affected components. Refer to Removal and Installation.
  2. Perform distance sensor alignment. Refer to Work Procedure.
.
 
2.CHECK DISTANCE SENSOR DIAGNOSTIC TROUBLE CODE RESULTS
Check if the “C2581-92” is detected in "Diagnostic Trouble Code" of “LASER/RADAR”.
Is “C2581-92” detected?
Replace the distance sensor. Refer to Removal and Installation.
INSPECTION END