Diagnosis Procedure
1.
STEERING TORQUE CALIBRATION
M.U.T.-III SE
Perform Steering Torque Calibration. Refer to
Work Procedure
.
Erase all Diagnostic Trouble Code results.
Perform "Read All DTCs".
Check if "C1F00-54" is detected in "Self Diagnostic" of "ICC/ADAS 2".
Is “C1F00-54” detected?
Replace the ADAS control unit 2. Then perform Steering Torque Calibration again. Refer to
Removal and Installation
.
INSPECTION END.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
M.U.T.-III SE
.
Replace the ADAS control unit 2. Then perform Steering Torque Calibration again. Refer to Removal and Installation.
INSPECTION END.