[Previous][Next]
Diagnosis Procedure
1.CHECK STEERING VIBRATION MOTOR CIRCUIT
  1. Turn the electric motor switch ON.
  2. Select the actuator test item "STRG vibration" (in "Special Function") of "ICC/ADAS 2" with M.U.T.-III SE.
  3. With operating the test item, check the operation.
    ON : Steering vibration motor is activated.
    OFF: Steering vibration motor is not activated.
Is the inspection result normal?
.
.
 
2.CHECK HARNESS BETWEEN SPIRAL CABLE AND ADAS CONTROL UNIT 2
  1. Turn the electric motor switch OFF.
  2. Disconnect the spiral cable connector.
  3. Disconnect the ADAS control unit 2 connector.
  4. Check continuity between the spiral cable harness connector and ADAS control unit 2 harness connector.
    Spiral cable ADAS control unit 2 Continuity
    Connector Terminal Connector Terminal
    M302 B440Existed
    3 16
  5. Check continuity between the spiral cable harness connector and ground.
    Spiral cable Ground Continuity
    Connector Terminal
    M302 Not existed
    3
Is the inspection result normal?
.
Repair the harnesses or connectors.
 
3.CHECK SPIRAL CABLE
Check for continuity between the spiral cable terminals.
Spiral cable Continuity
Terminal
2 35 Existed
3 34
Is the inspection result normal?
.
Replace spiral cable.
 
4.CHECK STEERING VIBRATION MOTOR SIGNAL
  1. Connect the all connectors.
  2. Turn the electric motor switch ON.
  3. Select the actuator test item "STRG vibration" (in "Special Function") of "ICC/ADAS 2" with M.U.T.-III SE.
  4. Check voltage between the ADAS control unit 2 harness connector and ground.
    ADAS control unit 2 Condition Voltage
    (Approx.)
    Connector Terminal
    + -
    B440Ground At “STRG vibration” test of “Active test” 12 V
Is the inspection result normal?
Replace the steering vibration motor. Refer to Removal and Installation.
.
 
5.CHECK DIAGNOSTIC TROUBLE CODE RESULTS
Check if any DTC other than “C1F00-XX” is detected in "Diagnostic Trouble Code" of “ICC/ADAS 2”.
Is any DTC detected?
Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC IndexDTC Index.
Replace the ADAS control unit 2. Refer to Removal and Installation.