1.PERFORM CONFIRMATION PROCEDURE
WITH M.U.T.-III SE- Turn the electric motor switch ON.
- Erase DTC.
- Turn the electric motor switch OFF and wait at least 30 seconds.
- Turn the electric motor switch ON and wait at least 2 seconds or more.
- Select “Diagnostic Trouble Code” mode of “MULTI AV” using M.U.T.-III SE.
- Check DTC.
Is DTC "U0079–00" detected?
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Perform the trouble diagnosis for CAN communication system. Refer to CAN Communication Signal Chart
.