[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionWhen you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to Work Procedure).
Pre-removal and Post-installation Operation
Floor console assembly removal and installation (Refer to Instrument Panel – Floor Console Assembly Removal and Installation).
Removal Steps
1.Ground bolt
2.Around view monitor control unit
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< GROUND BOLT INSTALLATION
Check the head mark "E" and install the ground bolt.