Diagnosis procedure
1.
PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
Turn the electric motor switch ON.
Erase DTC.
Perform confirmation procedure again.
DTC Description
.
Is DTC U2140-87 detected?
Replace TCU. Refer to Removal & Installation.
Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Replace TCU. Refer to Removal & Installation. Removal & Installation.
INSPECTION END