Diagnosis Procedure
1.
CHECK TEL ANTENNA SIGNAL CIRCUIT
Turn the electric motor switch OFF.
Disconnect TCU harness connector.
Check the continuity between TCU harness connector (telematics antenna side) and ground.
TCU
Ground
Continuity
Connector
Terminal
M35
28
Not existed
29
Is the inspection result normal?
Replace TCU. Refer to
Removal & Installation
.
Replace telematics antenna. Refer to
Removal & Installation
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace TCU. Refer toRemoval & Installation
.
Replace telematics antenna. Refer to Removal & Installation.