Diagnosis procedure
1.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn the electric motor switch ON.
Erase DTC.
Perform confirmation procedure again. Refer to DTC Description
DTC Description
.
Is DTC B2E1B-06 detected?
Replace TCU. Refer to Removal & Installation
Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Replace TCU. Refer to Removal & Installation Removal & Installation.
INSPECTION END