Diagnosis Procedure
1.
CHECK SONAR SENSOR
Check that the bumper is not covered with snow or mud entirely.
Is the sonar sensor covered with ice or mud?
Clean the sonar sensor.
.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn electric motor switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B2729-97 detected again?
Replace the front sonar sensor LH outer. Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Clean the sonar sensor.
.
With M.U.T.-III SE.Replace the front sonar sensor LH outer. Refer to Removal and Installation. INSPECTION END