Component Inspection

1.CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Remove the fuel level sensor unit and fuel pump. Refer to FUEL TANK REMOVAL AND INSTALLATION.
Check the resistance between fuel level sensor unit and fuel pump.
Terminals Condition Resistance (Ω)
(Approx.)
Height [mm (in)]
Fuel level sensor unit and fuel pump
1 2 Full^* (A) 28 178.0 (7.01)
Empty^* (B) 113.5 25.0 (0.98)
*: When float rod is contact with stopper.

Is inspection result normal?

INSPECTION END

Replace fuel level sensor unit and fuel pump. Refer to FUEL PUMP MODULE DISASSEMBLY AND ASSEMBLY

Terminals		Condition	Resistance (Ω) (Approx.)	Height [mm (in)]
Fuel level sensor unit and fuel pump
1	2	Full^* (A)	28	178.0 (7.01)
		Empty^* (B)	113.5	25.0 (0.98)