[Previous][Next]
Removal and Installation
cautionTo install the 12V battery, carefully read the following instructions.
  • To prevent damage to the parts, connect the 12V battery cable to the positive terminal first.
  • After connecting 12V battery cables, to securely supply 12V battery voltage, ensure that they are tightly clamped to 12V battery terminals for good contact.
  • To securely supply 12V battery voltage, check 12V battery terminal for poor connection caused by corrosion.
  • After disconnecting the 12V battery terminal, some systems need to be reconfigured. For details, refer to Required Procedure After Battery Disconnection.
Pre-removal and Post-installation Operation
Tool lid mask B removal and installation (Refer to Body Interior - Luggage TrimRemoval and Installation).
Removal steps
1.Battery bracket
2.Connection of the 12V battery harness (12V battery negative terminal) (Refer to Precautions for Removing Battery Terminal.)
3.Fusible link box cover
4.Connection of the 12V battery harness (12V battery positive terminal)
5.Fusible link box
6.Gas discharge tube
7.12V battery
8.12V battery current sensor
9.Battery tray