Component Inspection
1.
CHECK BACK DOOR OPENER SWITCH
Turn the power supply mode of the electric motor switch to OFF.
Disconnect back door opener switch connector.
Check continuity between back door opener switch terminals.
Back door opener switch
Condition
Continuity
Terminal
1
2
Back door opener switch
Pressed
Existed
Released
Not existed
Is the inspection result normal?
INSPECTION END
Replace back door opener switch. Refer to
REMOVAL AND INSTALLATION
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace back door opener switch. Refer to REMOVAL AND INSTALLATION
.