[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B24B4-02A/C CONTROL COMM
(Air conditioning control communication)
Diagnosis conditionWhen electric motor switch is ON
Signal (Terminal)LIN (A/C switch assembly) signal
ThresholdReceive internal circuit error message via A/C switch assembly to LIN communication
Diagnosis delay time30 second or more
 
 
POSSIBLE CAUSE
A/C switch assembly (internal circuit malfunction)
 
 
FAIL-SAFE
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DIAGNOSTIC TROUBLE CODE
With M.U.T.-III SE
  1. Change the power supply mode of the electric motor switch to ON (READY indicator: ON).
  2. Select “Diagnostic Trouble Code” mode of “HVAC” using M.U.T.-III SE.
  3. Check DTC.
Is DTC detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END