[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Turn the electric motor switch ON.
cautionNever start the engine.
2. Release the parking brake.
cautionIf the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
3. Turn the electric motor switch OFF.
4. Disconnect 12V battery negative terminal. Refer to Removal and Installation.
5. Remove rear tires. Refer to Removal and InstallationRemoval and Installation.
6. Disconnect parking brake actuator harness and rear wheel sensor harness connectors.
7. Remove parking brake actuator harness and rear wheel sensor harness mounting bolts.
8. Remove parking brake actuator harness and rear wheel sensor harness from the vehicle.
 
 
INSTALLATION
Install the reverse order of the removal.