2. Replace the brake booster if the input rod length is not the standard.
INSPECTION AFTER INSTALLATION
Operation
Depress the brake pedal several times at 5-second intervals with the engine stopped. Start the engine with the brake pedal fully depressed. Check that the clearance between brake pedal and dash lower panel decreases.
note
A slight impact with a small click may be felt on the pedal when the brake pedal is fully depressed. this is normal phenomenon due to the brake system operation.
ADJUSTMENT AFTER INSTALLATION
Perform the brake pedal adjustment after installing the brake pedal assembly. Refer to Inspection and Adjustment.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
