REAR INTERLOCK CONNECTOR CHECK
1.
Remove the service plug (Refer to
PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE
).
2.
Remove the EV control unit cover (LH) and (RH) (Refer to
ON BOARD CHARGER (OBC) &DC-DC CONVERTER REMOVAL AND INSTALLATION
).
3.
Disconnect the rear interlock connector.
4.
Check that there is a continuity between the rear interlock connector terminals.
5.
If there is no coninuity between the rear interlock connector terminals, replace the rear interlock connector.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)
)