REMOVAL AND INSTALLATION
danger
When servicing the junction box, On Board Charger (OBC)/DC-DC converter, and AC inverter, disconnect the rear interlock connector in addition to the service plug removal. (Refer to
PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE
).
Pre-removal and Post-installation Operation
EV control unit cover (Refer to On board charger (OBC)/DC-DC converter
ON BOARD CHARGER (OBC) &DC-DC CONVERTER REMOVAL AND INSTALLATION
)
Removal steps
1.
AC inverter cable
2.
AC inverter
REMOVAL SERVICE POINT
<<A>> AC INVERTER CABLE REMOVAL
For the disconnecting procedures for AC inverter cable connector, refer to Precautions on how to use the high-voltage vehicle
PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE
.