If the electric oil pump is dropped, do not reuse that electric oil pump.
Do not operate the electric oil pump when the EV fluid is empty. If the electric oil pump is operated, the electric oil pump service life may be reduced. Therefore, do not reuse that electric oil pump.
Front bumper assembly removal and installation (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Front Bumper Assembly Removal and Installation)
Removal steps
1.
EV oil cooler hose I connection
2.
EV oil cooler hose A connection
3.
Electric oil pump
4.
Electric oil pump bracket
REMOVAL SERVICE POINT
<<A>> EV OIL COOLER HOSE DISCONNECTION
Make mating marks on the hose and the hose clip as shown to install them in the original position.
INSTALLATION SERVICE POINT
>>A<< EV OIL COOLER HOSE CONNECTION
1. Insert the hose until it hits to the electric oil pump.
2. Align the mating marks on the hose and hose clip.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
