[Previous][Next]
OIL LEAK CHECK
1. Remove the clips to remove the front grille cover (Refer to Removal and Installation).
2. Raise the vehicle.
3. Remove the bolts(A) and clips(C) to remove the engine room under cover front B (B).
4. Remove the clips to remove the engine room side cover (LH) (Refer to Removal and Installation).
5. Visually check the front motor, generator, electric oil pump, EV oil cooler, hoses, etc. for oil leakage.
6. Check the hoses for damage and deterioration, and check the hose clamp for looseness.
7. If any oil leak is found, drain the oil (Refer to OIL CHANGE).
8. Repair or replace the component where the oil leak is found.
9. Refill the oil (Refer to OIL CHANGE), and then check that no oil leaks are found around the relevant component.