7. JUNCTION BOX NO. 2 REMOVAL AND INSTALLATION
danger
When servicing the high voltage components, be sure to wear an insulating protective equipment to measure the high voltage (Refer to
PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE
).
Required Special Tools:
MB992915: Electric insulation sheet
Removal steps
1.
Junction box No. 2 bus bar (A)
2.
Junction box No. 2 bus bar (B)
3.
Drive battery high voltage connector (rear) bus bar (B)
4.
Drive battery high voltage connector (rear) bus bar (A)
5.
Drive battery high voltage connector (front) bus bar
6.
Junction box No. 2
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)