5. BATTERY CONTROL WIRING HARNESS, CELL VOLTAGE WIRING HARNESS REMOVAL AND INSTALLATION
danger
When servicing the high voltage components, be sure to wear an insulating protective equipment to measure the high voltage (Refer to
PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE
).
Required Special Tools:
MB992915: Electric insulation sheet
Removal steps
•
Battery control wiring harness connector connection
•
Cell voltage wiring harness connector connection
1.
Snap ring
2.
Battery control wiring harness
3.
Cell voltage wiring harness
REMOVAL SERVICE POINTS
<<A>> SNAP RING REMOVAL
Remove the snap ring from the battery control wiring harness as shown in the illustration.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)
)