[Previous][Next]
SERVICE PLUG CHECK
dangerWhen pulling out the service plug, wear the specified protective equipment (Refer to PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE).
Required Special Tools:
 
 
 
 
1. Pull out the service plug to shut off the high voltage supplied to the high voltage system (Refer to PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE).
2. Check that the service plug is not damaged. If damaged, replace the service plug.
3. Check the continuity between the high voltage terminals of the service plug.
4. Check the continuity between the engagement detection terminals of the service plug.
5. If there is no continuity between the high voltage terminals or engagement detection terminals, replace the service plug.