[Previous][Next]
DTC No. P1A61-55 Configuration not Completed
 
 
 
 
DTC SET CONDITION
Check Condition
  • The IGCT power supply is ON.
Judgment Criterion
  • The vehicle specification writing for PHEV-ECU is not completed.
 
 
TROUBLESHOOTING HINTS
  • The vehicle specification writing is not completed.
  • The vehicle specification writing fails.
  • Malfunction of the PHEV-ECU
 
 
DIAGNOSIS
Required Special Tools:
  • MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
  • MB992745: V.C.I.-Lite main harness A
  • MB992747: V.C.I.-Lite USB cable short
  • MB992748: V.C.I.-Lite USB cable long
1.Check whether the DTC is set again.
(1) Perform the vehicle specification writing for PHEV-ECU (Refer to VEHICLE SPECIFICATION WRITING).
(2) Check whether the DTC is set again.
Is the DTC set?
Replace the PHEV-ECU (Refer to PHEV-ECU REMOVAL AND INSTALLATION).
The procedure is complete.