[Previous][Next]
DTC No. P1A36-92 PHEV Engine fail
 
 
 
 
DTC SET CONDITION
Check Condition
  • IThe IGCT power supply is ON.
Judgment Criterion
  • The engine fail signal is received from the engine control module (ECM) via CAN communication.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of the engine control module (ECM) system
  • Airbag deployment
 
 
DIAGNOSIS
Required Special Tools:
  • MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
  • MB992745: V.C.I.-Lite main harness A
  • MB992747: V.C.I.-Lite USB cable short
  • MB992748: V.C.I.-Lite USB cable long
1.M.U.T.-IIISE other DTC
Check whether the PHEV-ECU sets the following DTC.
  • DTC No. P1A25-9A Crash detection
Is the DTC set?
Troubleshoot the set DTC (Refer to DTC No. P1A25-9A Crash detection).
 
2.M.U.T.-IIISE other system DTC
Check whether the engine control module (ECM) sets the DTC.
Is the DTC set?
Troubleshoot the set DTC [Refer to Multiport Fuel Injection (MFI) - Troubleshooting DIAGNOSTIC TROUBLE CODE CHART].
The trouble can be an intermittent malfunction (Refer to General Information - How to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunctions HOW TO COPE WITH INTERMITTENT MALFUNCTIONS).