REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Engine Coolant Draining and Refilling (Refer to On-Vehicle Service
ENGINE COOLANT REPLACEMENT
)
Water Pump Drive Belt Removal and Installation (Refer to Engine Electrical
CRANKSHAFT PULLEY REMOVAL AND INSTALLATION
)
Removal steps
•
Water return hose connection (Refer to
WATER HOSE AND WATER PIPE REMOVAL AND INSTALLATION
)
1.
Water pump inlet pipe mounting nut
2.
Water pump
3.
Water pump inlet pipe gasket
4.
Water pump gasket
INSTALLATION SERVICE POINT
>>A<< WATER PUMP GASKET/WATER PUMP INLET PIPE GASKET INSTALLATION
Install the gasket as its protrusion is in the direction shown.
)![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)