[Previous][Next]
Inspection Procedure 1: The malfunction indicator lamp (SERVICE ENGINE SOON or check engine lamp) does not illuminate right after the power supply mode of the electric motor switch is turned on
 
 
 
 
COMMENT
  • The combination meter illuminates malfunction indicator lamp (SERVICE ENGINE SOON or check engine lamp) just after the power supply mode of the electric motor switch is ON.
  • If the malfunction indicator lamp (SERVICE ENGINE SOON or check engine lamp) does not illuminate just after the power supply mode of the electric motor switch is ON, the causes of this failure may be the defective combination meter and so on.
 
 
TROUBLESHOOTING HINTS (The most likely causes for this case:)
Combination meter failed.
 
 
DIAGNOSIS
1.STEP 1. Check the malfunction symptoms.
Q: Does the malfunction symptom persist?
Check combination meter system (Refer to DRIVER INFORMATION & MULTIMEDIA, Meter, Warning Lamp & Indicator – Basic Inspection – Mater, Warning Lamp & Indicator – Diagnosis and Repair Workflow Work flow ).
Intermittent malfunction (Refer to GENERAL INFORMATION, General Information – How to Use Troubleshooting/Inspection Service Points HOW TO COPE WITH INTERMITTENT MALFUNCTIONS).