ACTUATOR TEST REFERENCE TABLE

M.U.T.-III SE SCAN TOOL DISPLAY	ITEM NO.	INSPECTION ITEM	DRIVE CONTENTS	INSPECTION REQUIREMENT	NORMAL CONDITION
Injection cut	10	Fuel injector	Specified fuel injector is stopped.	Continuous idling mode (cut the fuel supply to each injector in turn and check cylinders which don't affect idling),	Idle condition is changed by stopping selected cylinder: this can cause an unstable condition and the engine may stall.
Fuel Pump	20	Fuel tank pump	Fuel tank pump operates and fuel is recirculated.	Power supply mode of electric motor switch: ON Listen near the fuel tank for the sound of fuel tank pump operation.	Sound of operation is heard.
Purge Control Solenoid Valve	30	Evaporative emission purge solenoid	Solenoid valve turns from OFF to ON.	Power supply mode of electric motor switch: ON	Clicks when solenoid valve is driven.
IG 5 BTDC	40	Basic ignition timing	Set to ignition timing adjustment mode.	Engine: Continuous idling mode If the BMU data list item number 35: SOC CAN Output, charge state (control) is less than 35 percent, charge so that the charge state (control) can become 35 percent or more [Refer to Electric Power Train, Battery Management Unit (BMU) and Traction Battery – Troubleshooting DATA LIST REFERENCE TABLE] Connect timing light (Refer to Engine, Engine Mechanical – On-vehicle Service IGNITION TIMING CHECK)	5°BTDC ± 3°
Cooling fan	50	Radiator fan motor	Drive the fan motor.	Power supply mode of electric motor switch: ON	The radiator fan motors (LH and RH) rotate rapidly.
Oil control valve	60	Oil feeder control valve	Switch the oil feeder control valve from OFF to ON	Power supply mode of electric motor switch: ON	When the valve is actuated, operating noise is audible.
EVAP System Bypass Solenoid Valve	80	Bypass valve	Bypass valve turns from OFF to ON.	Power supply mode of electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the evaporative emission canister (main) for the sound of bypass valve operation.	Clicks when solenoid valve is driven. Data list item number 660: EVAP System Bypass Solenoid is displayed "ON".
EVAP System Bypass Solenoid Valve	80	Bypass valve	Bypass valve turns OFF.		Operating sound cannot be heard. Data list item number 660: EVAP System Bypass Solenoid is displayed "OFF".
EVAP System Vent Valve	90	Switching valve	Switching valve turns from OFF to ON.	Power supply mode of electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the evaporative leak check module (ELCM) for the sound of switching valve operation.	Clicks when solenoid valve is driven. Data list item number 650: EVAP System Vent Valve is displayed "ON".
EVAP System Vent Valve	90	Switching valve	Switching valve turns OFF.		Operating sound cannot be heard. Data list item number 650: EVAP System Vent Valve is displayed "OFF".
EVAP system sealing valve	100	Fuel tank solenoid valve	Fuel tank solenoid valve turns from OFF to ON.	Power supply mode of electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the fuel tank for the sound of fuel tank solenoid valve operation.	Clicks when solenoid valve is driven. The fuel tank differential pressure sensor output is coming near the atmospheric pressure. Data list item number 640: EVAP System Switching Valve is displayed "ON".
EVAP system sealing valve	100	Fuel tank solenoid valve	Fuel tank solenoid valve turns OFF.		Operating sound cannot be heard. Data list item number 640: EVAP System Switching Valve is displayed "OFF".
EVAP System Leak Detection Pump	110	Evaporative emission leak detection pump	Evaporative emission leak detection pump operates.	Power supply mode of electric motor switch: ON (not READY) It is not in the evaporative emission system monitor test. It is not in the refuel control mode. Listen near the ELCM for the sound of evaporative emission leak detection pump operation.	Operating sound can be heard. Data list item number 630: EVAP System Leak Detection Pump control is displayed "ON".
EVAP System Leak Detection Pump	110	Evaporative emission leak detection pump	Evaporative emission leak detection pump stops.		Operating sound cannot be heard. Data list item number 630: EVAP System Leak Detection Pump control is displayed "OFF".
Fuel Filler Door Motor Relay	120	Fuel filler lid opener relay	Fuel filler lid opener relay turns from OFF to ON.	Power supply mode of electric motor switch: ON (not READY) The fuel filler lid opener relay is not in operation.	Fuel filler lid opens^*. Data list item number 620: Fuel Fill Door Motor relay is displayed "ON".
Fuel Filler Door Motor Relay	120	Fuel filler lid opener relay	Fuel filler lid opener relay turns OFF.		Operating sound of fuel filler lid opener actuator cannot be heard. Data list item number 620: Fuel Fill Door Motor relay is displayed "OFF".

note	*: When the fuel filler lid is opened, the fueling control mode is activated. To deactivate the fueling control mode, perform the following operations. After the operation, leave the vehicle for 30 minutes. Drive the vehicle for approximately 30 seconds continuously.