[Previous][Next]
Diagnosis Procedure
1.VISUAL INSPECTION
Check distance sensor and distance sensor bracket for damage or looseness.
Does damage or looseness exist?
  1. Repair or replace affected components. Refer to Removal and Installation.
  2. Perform distance sensor alignment. Refer to Work Procedure.
.
 
2.CHECK DISTANCE SENSOR SELF-DIAGNOSIS RESULTS
Check if the “C2581-92” is detected in “Self Diagnostic Result” of “LASER/RADAR”.
Is “C2581-92” detected?
Replace the distance sensor. Refer to Removal and Installation.
INSPECTION END