Multi-around Monitor Control Unit
Component Function Within The System
Multi-around monitor control unit control a multi-around monitor system.
Individual Component Function
- Necessary signals are transmitted/received to/from control unit via CAN communication.
- Supplies a power supply to each camera.
- Camera image signals received from each camera are converted/synthesized in the multi-around monitor control unit and transmitted to the AV control unit by LVDS.
| note | LVDS (Low Voltage Differential Signaling): LVDS is differential signaling system, meaning that it transmits information as the difference between the voltages on a pair of wire, the two wire voltages are compared at the receiver. |
Component Parts Location
Multi-around monitor control unit is located in the center console box.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
.