[Previous][Next]
Removal and Installation
caution
  • When you remove/install or replace the camera, you should check the camera image on the multi-around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to Work Procedure).
  • To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
  • Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
 
 
Pre-removal and Post-installation Operation
Front Bumper Assembly Removal and Installation (Refer to FRONT BUMPER ASSEMBLY REMOVAL AND INSTALLATION).