Diagnosis Procedure
1.
INTERNAL BATTERY CHARGING
Turn ignition switch ON or engine idling more than one hour for internal battery charging of TCU.
:
.
2.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch OFF.
Perform confirmation procedure again. Refer to
DTC Description
.
Is DTC B2E04‐16 detected?
Replace TCU. Refer to
Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
With M.U.T.-III SE.
Replace TCU. Refer to Removal & Installation.
INSPECTION END