Diagnosis Procedure
1.
CHECK REAR SENSORS
Check the rear sensor for dirt and damage.
Is inspection result normal?
.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again.
Is DTC B2756-94 detected again?
Replace rear sensors. Refer to
Removal and Installation
.
INSPECTION END
With M.U.T.-III SE
INSPECTION END![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.