1.CHECK REAR SONAR SENSOR SIGNAL RH SIDE CIRCUIT (SHORT)
- Turn ignition switch OFF.
- Disconnect sonar control unit connector and rear sonar sensor RH side connector.
- Check continuity between sonar control unit harness connector and ground.
| Sonar control unit | Ground | Continuity |
| Connector | Terminal |
| B49 | 50 | Not existed |
Is the inspection result normal?
Repair the harness or connector.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the rear sonar sensor RH side. Refer to Removal and Installation
.