Diagnosis Procedure
1.
CHECK REAR SONAR SENSOR SIGNAL RH OUTER CIRCUIT (OPEN)
Turn ignition switch OFF.
Disconnect sonar control unit connector and rear sonar sensor RH outer connector.
Check continuity between sonar control unit harness connector and rear sonar sensor RH outer connector.
Sonar control unit
Rear sonar sensor RH outer
Continuity
Connector
Terminal
Connector
Terminal
B20
10
B460
2
Existed
Is the inspection result normal?
.
Repair the harness or connector.
2.
CHECK REAR SONAR SENSOR RH OUTER GROUND CIRCUIT
Check continuity between sonar control unit harness connector and rear sonar sensor RH outer harness connector.
Sonar control unit
Rear sonar sensor RH outer
Continuity
Connector
Terminal
Connector
Terminal
B20
14
B460
3
Existed
Is the inspection result normal?
Replace the rear sonar sensor RH outer. Refer to
Removal and Installation
.
Repair the harness or connector.