[Previous][Next]
Turn Signal Indicator Light
 
 
DESIGN/PURPOSE
Turn signal indicator light informs the driver that turn signal light is in ON status.
 
 
BULB CHECK
Not applicable
 
 
SYNCHRONIZATION WITH WARNING CHIME
Synchronization is applied.
For warning chime. Refer to System Description.
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
 
 
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to Fail-Safe.
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
  • BCM transmits turn indicator signal to combination meter via CAN communication.
  • Combination meter blinks the turn signal indicator light according to the turn indicator signal.
 
 
LIGHTING CONDITION
Turn signal indicator light (LH)
  • When turn signal light (LH) is turned ON.
Turn signal indicator light (RH)
  • When turn signal light (RH) is turned ON.
 
 
SHUTOFF CONDITION
Turn signal indicator light (LH)
  • When turn signal light (LH) is turned OFF.
Turn signal indicator light (RH)
  • When turn signal light (RH) is turned OFF.