Inspection Procedure
1.
CHECK 12V BATTERY TERMINALS CONNECTION
Check if 12V battery terminals are clean and tight.
Is the inspection result normal?
.
Repair 12V battery terminals connection.
2.
CHECK "B" TERMINAL CONNECTION
Check if "B" terminal (generator ground harness) is clean and tight.
Is the inspection result normal?
.
Repair "B" terminal connection.
3.
CHECK 12V BATTERY STATUS
Check 12V battery status. Refer to
Work Flow
.
Is the inspection result normal?
Replace 12V battery. Refer to
Removal and Installation
.
4.
CHECK DRIVE BELT TENSION
Check drive belt tension. Refer to
Inspection
.
Is the inspection result normal?
INSPECTION END
Repair as needed.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
Repair 12V battery terminals connection..Repair "B" terminal connection..Replace 12V battery. Refer to Removal and Installation..INSPECTION ENDRepair as needed.