[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove cowl top seal .
2. Remove cowl top cover . Refer to Removal and Installation.
3. Disconnect the 12V battery cable from the negative terminal.
cautionTo prevent damage to the parts, disconnect the 12V battery cable from the negative terminal first.
4. Disconnect the 12V battery cable from the positive terminal.
5. Remove battery fix frame mounting nuts and battery fix frame .
6. Remove 12V battery.
 
 
INSTALLATION
Install in the reverse order of removal.
cautionTo install the 12V battery, carefully read the following instructions.
  • To prevent damage to the parts, connect the 12V battery cable to the positive terminal first.
  • After connecting 12V battery cables, to securely supply 12V battery voltage, ensure that they are tightly clamped to 12V battery terminals for good contact.
  • To securely supply 12V battery voltage, check 12V battery terminal for poor connection caused by corrosion.
Note the following, and install in the reverse order of the removal. Refer to Required Procedure After Battery Disconnection.