[Previous][Next]
REMOVAL AND INSTALLATION
 
 
caution
  • When you remove/install or replace the camera, you should check the camera image on the multi-around monitor "Bird-eye view." If necessary, calibrate the monitor (Refer to Basic Inspection for Multi-around Monitor Work Procedure). <Vehicles with multi-around monitor>
  • To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
  • Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
Pre-removal and Post-installation Operation
Door mirror removal
1.Door mirror assembly
Remote controlled mirror switch removal
2.Remote controlled mirror switch (Power window main switch) (Refer to Power Window Main Switch Removal and Installation)
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< DOOR MIRROR ASSEMBLY INSTALLATION
1. Fasten the door mirror assembly harness from the front side of the door window glass runchannel.
2. Fix the harness clip to harness bracket from the bottom.