Remote Engine Start Control

A/C amp. operates air conditioning system in following mode according to the vehicle situation when remote engine start function is operated. For an overall description of the remote engine start function. Refer to System Description

Conditions		Cooler mode	Normal mode	Defrost mode	Heated normal mode
Vehicle situation		Air mix door opening angle^*1 (COLD ↔ HOT)			When XM^*2 is changed while defrost mode
Air conditioning control	Air flow	AUTO	AUTO	AUTO	AUTO
	Air outlet	AUTO	AUTO	DEF	AUTO
	Air inlet	AUTO	AUTO	AUTO	AUTO
	A/C compressor	ON	Depend on A/C request	Depend on A/C request	Depend on A/C request
	Setting temperature (driver side)	25°C (77°F)	25°C (77°F)	25°C (77°F)	25°C (77°F)
	Setting temperature (passenger side)	25°C (77°F)	25°C (77°F)	25°C (77°F)	25°C (77°F)
	Setting temperature (rear side)	25°C (77°F)	25°C (77°F)	25°C (77°F)	25°C (77°F)
	SYNC	ON	ON	ON	ON
Other control	Heated steering wheel control	OFF	OFF	ON	No change
	Heated seat control	OFF	OFF	AUTO	No change
	Rear window defogger control	OFF	OFF	ON	No change
A/C switch assembly	Switch indicator light / Display	ON	ON	ON	ON
A/C switch assembly	Switch operation	Accept	Accept	Accept	Accept

*1: For details of air mix door opening angle. Refer to Temperature Control

*2: The reading of XM can be checked by the data monitor of M.U.T.-III SE.

Remote engine start control OFF condition (When any of the following conditions are satisfied)

Remote engine start function: Stop
Ignition switch: OFF

A/C switch assembly: Switch operation

note	When switch is operated while remote engine start function is operated, air conditioning system hold the setting. When switch is not operated while remote engine start function is operated, air conditioning system returns to the previous setting.