[Previous][Next]
Diagnosis Procedure
1.PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS
With M.U.T.-III SE
Perform “Self Diagnostic Result” for “ABS”.
Is any DTCs detected?
Check the DTCs. Refer to DTC Index.
.
 
2.CHECK BCM INPUT/OUTPUT SIGNAL
Check BCM input/output signal values. Refer to Reference Value.
Is the inspection result normal?
Check pin terminal and connection of each harness connector for malfunctioning conditions.
Replace the BCM. Refer to Removal and Installation.