[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove engine under cover. Refer to Exploded View.
2. Drain the transfer oil. Refer to Draining.
3. Disconnect transfer oil temperature sensor harness connector.
4. Remove transfer oil temperature sensor .
: Vehicle front
caution
  • Never twists and damage the harness of transfer oil temperature sensor.
  • If transfer oil temperature sensor is subjected to impact by dropping or hitting it, replace with new one.
 
 
INSTALLATION
Note the following, and install in the reverse order of removal.
  • For non-reusable parts, refer to Exploded View.
  • For each tightening torque, refer to Exploded View.
    cautionBe sure to dry the sensor thread before installation.
  • Check the oil level and the oil leakage after installation. Refer to Inspection.