Inspection
OIL LEAKAGE
Remove engine under cover during working. Refer to
Exploded View
.
Check transfer surrounding area (oil seal, drain plug, and filler plug etc.) for oil leakage.
OIL LEVEL
Remove engine under cover during working. Refer to
Exploded View
.
1.
Check oil level from filler plug mounting hole as shown in the figure, after removing filler plug
and gasket from transfer assembly.
: Vehicle front
caution
Turn the ignition switch OFF while checking oil level.
Oil level should be level with bottom of filler plug mounting hole. Add transfer oil if necessary. Refer to
Refilling
.
2.
Set a gasket on filler plug and install it on transfer assembly.
caution
Never reuse gasket.
3.
Tighten filler plug to the specified torque. Refer to
Exploded View
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
and gasket from transfer assembly.)
..