| Drive pinion lock nut | | Companion flange | | Dust shield |
| Drive pinion oil seal | | Pinion bearing assembly | | O-ring |
| Drive pinion adjusting shim | | Drive pinion | | O-ring |
| Transfer case oil seal | | Dowel pin | | Plug |
| Gasket | | Transfer case | | Baffle plate |
| Ring gear bearing adjusting shim (transfer case side) | | Ring gear bearing (transfer case side) | | Ring gear |
| Ring gear shaft | | Ring gear shaft oil seal | | Ring gear bearing (transfer cover side) |
| Ring gear bearing adjusting shim (transfer cover side) | | Transfer cover oil seal (inner) | | O-ring |
| Transfer cover | | Transfer cover oil seal (outer) | | Filler plug |
| Drain plug | | Transfer oil temperature sensor | | Gasket |
| Oil seal lip | | Comply with the assembly procedure when tightening. Refer to Disassembly and Assembly. | | |
: N·m (kg-m, in-lb) |
: N·m (kg-m, ft-lb) |
: Always replace after every disassembly. |
: Select with proper thickness. |
: Apply transfer oil. |
*: Apply anti-corrosive oil. |
: Apply multi-purpose grease. |