 | Drive pinion lock nut |  | Companion flange |  | Dust shield |
 | Drive pinion oil seal |  | Pinion bearing assembly |  | O-ring |
 | Drive pinion adjusting shim |  | Drive pinion |  | O-ring |
 | Transfer case oil seal |  | Dowel pin |  | Plug |
 | Gasket |  | Transfer case |  | Baffle plate |
 | Ring gear bearing adjusting shim (transfer case side) |  | Ring gear bearing (transfer case side) |  | Ring gear |
 | Ring gear shaft |  | Ring gear shaft oil seal |  | Ring gear bearing (transfer cover side) |
 | Ring gear bearing adjusting shim (transfer cover side) |  | Transfer cover oil seal (inner) |  | O-ring |
 | Transfer cover |  | Transfer cover oil seal (outer) |  | Filler plug |
 | Drain plug |  | Transfer oil temperature sensor |  | Gasket |
 | Oil seal lip |  | Comply with the assembly procedure when tightening. Refer to Disassembly and Assembly . | | |
: N·m (kg-m, in-lb) |
: N·m (kg-m, ft-lb) |
: Always replace after every disassembly. |
: Select with proper thickness. |
: Apply transfer oil. |
*: Apply anti-corrosive oil. |
: Apply multi-purpose grease. |