[Previous][Next]
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF COMBINATION METER
With M.U.T.-III SE
Perform self-diagnosis for “METER/M&A”.
Is any DTC detected?
Check the DTC. Refer to DTC Index (Full TFT meter), DTC Index (7 inch information display).
.
 
2.CHECK TERMINALS AND HARNESS CONNECTORS
Check AWD control unit pin terminals for damage or loose connection with harness connector.
Is inspection result normal?
After turning the ignition switch OFF, perform DTC confirmation procedure again. If DTC “U214E-87” is detected, replace actuator assembly due to the malfunction of the AWD control unit. Refer to Disassembly and Assembly.
Repair or replace error-detected parts.