Diagnosis Procedure
1.
PERFORM AIR BLEEDING AND INITIALIZE OIL DETERIORATION LEVEL
With M.U.T.-III SE
Perform air bleeding and initialize oil deterioration level. Refer to
Description
.
Turn the ignition switch OFF.
Perform the “DTC CONFIRMATION PROCEDURE”. Refer to
DTC Description
.
Is DTC “C1220-54” detected again?
Replace electro-hydraulic coupling assembly. Refer to
Disassembly and Assembly
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
..
Replace electro-hydraulic coupling assembly. Refer to Disassembly and Assembly.
INSPECTION END