[Previous][Next]
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
  1. Erase self-diagnostic results for “ALL MODE AWD/4WD”.
  2. Turn the ignition switch OFF, and wait for 10 seconds or more.
  3. Turn the ignition switch ON, and wait for 15 seconds or more.
  4. Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is DTC “C1219-11” detected?
Replace actuator assembly due to the malfunction of the AWD control unit. Refer to Disassembly and Assembly.
INSPECTION END