With M.U.T.-III SE- Erase self-diagnostic results for “ALL MODE AWD/4WD”.
- Turn the ignition switch OFF, and wait for 10 seconds or more.
- Turn the ignition switch ON, and wait for 15 seconds or more.
- Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is DTC “C1218-18” detected?
INSPECTION END![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace electro-hydraulic coupling assembly. Refer to Disassembly and Assembly
.